The Lassco Spinnit FMMSP-3 Paper Drill is the deluxe version of the FMM-3 with
both pneumatic operation and Stationary Drill Heads set for drilling three holes
4 -1/4 inch center to center. The Lassco Spinnit FMMSP-3 Paper Drill has a 2
inch drilling capacity. It also has 6 stop collars for precise drilling. The
Lassco Spinnit FMMSP-3 Paper Drill comes equipped with a traversing table that
provides the user with a versatile production Paper Drill at an affordable
price. The Lassco Spinnit FMMSP-3 Paper Drill can handle paper sizes up to 15 x
32 inches.
Features
- The most versatile, compact, and affordable fully automatic 3 spindle drill
on the market today
- 2 inch drilling capacity
- Adjustable pneumatic lift with foot pedal activation
- Powered by your in-house air or with our select compact compressor
(compressor sold separately)
Specifications
- Table size: 15 x 32 inches
- Base footprint: 15 x 15 inches
- Table height: 35-1/2 inches
- Overall height: 52 inches
- Overall width: 32 inches
- Overall depth: 26 inches
- Motor: 3/4 HP, 115 Volts
- Recommended pneumatic requirements are: 3.1 CFM at 100 PSI (machine operates
at 80 PSI)
Some Pointers and Tips on Drilling: USE A SHARP DRILL BIT AT ALL TIMES.
Generally, a drill bit can be used for approximately four (4) hours of use
before it needs to be sharpened. Apply light pressure when sharpening. Too much
pressure may cause flaring of the tip which renders the bit unusable. Sharpening
stones are also recommended to debur the outside cutting edge of the your drill
bits for better performance. Use of Drill-Ease or Spin-Eze lubricant is
required.
